Hoisting Grip, Pre-Laced, for 3/8 in Coaxial Cable
Item Number 6001290
Hoisting grips are used with safety ropes to safely lift cables onto the tower and providing permanent support. Used for support to absorb additional strain from vibration, expansion, contraction and flexing. The pre-laced is used when top connector is installed after the antenna transmission line is hoisted. Stainless steel wire mesh is for indoor or outdoor use. CE certified.
Product Classification
| Product Classification | |
| Material Number | 6001290 |
| Part Number | – |
| Status | Active |
| Detail Description | Hoisting Grip, Pre-Laced, for 3/8 in Cable |
General Specifications
| Details | |
| Cable Range | 0.40-0.47 in | 10.2-11.9 mm |
| Mesh Length | 6.0 in | 152.4 mm |
| Eye Length | 6.0 in | 152.4 mm |
| Approximate Break Strength | 500 lbs | 226.7 kg |
| Working Load | 100.0 lbs | 45.3 kg (Safety Factor 5*) |
| Maximum Spacing Intervals | 200 ft | 60.96 m |
| Mesh Material | Stainless Steel |
| Support Clamp | Included |
| Warning Label | Yellow Mylar |
| Packaging and Weights | |
| UOM | 1 pcs |
| Packaging | Bag |
| Weight, gross | 0.07 lb | 0.03 kg |
| Certifications and Compliance | |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| RoHS | Compliant |
| CE | Compliant |
Additional Documentation and Resources
-
Product Brochure
-
Standards and Regulations
