Hoisting Grip, Pre-Laced, for 19.0-25.4mm Cable
Item Number 6009272
Hoisting grips are used with safety ropes to safely lift cables onto the tower and providing permanent support. Used for support to absorb additional strain from vibration, expansion, contraction and flexing. The pre-laced is used when top connector is installed after the antenna transmission line is hoisted. Stainless steel wire mesh is for indoor or outdoor use. CE certified.
Product Classification
| Product Classification | |
| Iteml Number | 6009272 |
| Part Number | – |
| Detail Description | Hoisting Grip, Pre-Laced, for 19.0-25.4mm Cable |
General Specifications
| Details | |
| Cable Range | 0.75-1.00 in | 19.0-25.4 mm |
| Mesh Length | 14.0 in | 355.6 mm |
| Eye Length | 8.0 in | 203.2mm |
| Maximum Spacing Intervals | 200 ft | 60.96 m |
| Approximate Break Strength | 2200 lbs |997 kg |
| Working Load | 440 lbs | 199 kg (Safety Factor 5*) |
| Mesh Material | Stainless Steel |
| Warning Label | Yellow Mylar |
| Packaging and Weights | |
| UOM | 1 pcs |
| Packaging | Bag |
| Weight, gross | 0.38 lb | 0.17 kg |
| Certifications and Compliance | |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| RoHS | Compliant |
| CE | Compliant |
Additional Documentation and Resources
-
Product Brochure
-
Standards and Regulations
