Your Trusted Wireless Site Components Manufacturer
Collaborate with us today for one-stop products and solutions that perform optimally to ensure reduced maintenance costs.
Hoisting grips are used with safety ropes to safely lift cables onto the tower and providing permanent support. Used for support to absorb additional strain from vibration, expansion, contraction and flexing. The pre-laced is used when top connector is installed after the antenna transmission line is hoisted. Stainless steel wire mesh is for indoor or outdoor use. CE certified.
Product Classification | |
Material Number | 6002934 |
Part Number | – |
Status | Active |
Detail Description | Hoisting Grip, Pre-Laced, for 1/4 in Cable |
Details | |
Cable Range | 0.24-0.39 in | 6.1-9.9 mm |
Mesh Length | 6.0 in | 152.4 mm |
Eye Length | 6.0 in | 152.4 mm |
Approximate Break Strength | 250 lbs | 113.3 kg |
Working Load | 50 lbs | 22.6 kg (Safety Factor 5*) |
Maximum Spacing Intervals | 200 ft | 60.96 m |
Mesh Material | Stainless Steel |
Support Clamp | Included |
Warning Label | Yellow Mylar |
Packaging and Weights | |
UOM | 1 pcs |
Packaging | Bag |
Weight, gross | 0.05 lb | 0.02 kg |
Certifications and Compliance | |
ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
RoHS | Compliant |
CE | Compliant |
Collaborate with us today for one-stop products and solutions that perform optimally to ensure reduced maintenance costs.
Terms of use   |   Privacy notice